Ultimate Racer

Hardware

Joystick port configuration

Specify here the joystick port configuration attributes.

Joystick port configuration

Use this pane to check the joystick port behaves correctly: the connected input pin status must change from gray (low) to green (high) when an event is detected. The pin status must change when you click on an output pin.

The joystick port usually uses port address 0x201 (default). You can cross check this setup with the control panel system properties tool. Check in the device manager your joystick port address:

Joystick port configuration

The joystick port address is first address of its resource setting.